No hot water? Don’t despair – call us now: 1300 87 50 20

SIMPLEX 3 phase electric instantaneous water heater

The Stiebel Eltron SimpleX instantaneous electric hot water system is designed to replace certain types of 3 phase electric instantaneous water heaters.

German engineered design from Stiebel Eltron

  • Silent water flow
  • Hydraulically controlled
  • 7.5 Litres per minute delivers a 25 Degrees Celsius rise
  • WaterMark approved, Lic No. WMKA21273, AS3498
  • Ideal for single bathroom dwellings
  • Switch on flow rate of 4.5 litres per minute
  • No flue, ventilation or safe tray required
  • No pressure relief valve required
  • Compact design for space saving horizontal installation flexibility

stiebel-water-heater-snuSNU single point of use open vented water heater

High quality Stiebel Eltron design

  • SNU water heater is made in Germany
  • Designed for single isolated sink
  • WaterMark approved. Lic No. WMKA00301, AS3498
  • Low Minimum standby power consumption
  • Saves energy and water through point of use installation
  • Compact space saving design
  • Installed underneath the sink for single point of use
  • 240V – 3 pin power cord with earthed plug 10Amp
  • Open vented design must be fitted with specialised tapware
  • 4 styles of sink mixers available
  • No safe tray required or ventilation required
  • Available in 5 litre (SNU 5) or 10 litre (SNU 10) tank capacity.

stiebel-3-phase-heaterDHB-E 18 AU and DHB-E 27 AU 60°C instantaneous 3 phase electric water heaters

  • Made in Germany
  • Electronic safety system with air detection
  • Suitable for hard and soft water areas
  • WaterMark Lic No. WMKA00301, AS3498
  • No flue, ventilation or safe tray required
  • 5 Year full parts and labour domestic warranty*
    *Conditions apply – refer warranty policy for full details.
  • Available in two sizes:
    • DHB-E 18 – 19.6kW, 27 Amps per phase, three phase 415V
    • DHB-E 27 – 29.1kW, 40 Amps per phase, three phase 415V

stiebel-3-phase-water-heaterDHB-E 13 AU 50°C instantaneous 3 phase electric water heater

  • Made in Germany, designed for Australian conditions
  • Temperature selection up to a maximum of 50°Celsius in accordance with AS3498
  • WaterMark approved, licence number WMKA00301, AS3498
  • Electronically controlled to accurately regulate the water temperature output
  • Suitable for hard and soft water areas
  • No flue, ventilation or safe tray required
  • Available in electrical size:
    • DHB-E 13 AU – 14.5kW, 20 Amps per phase, three phase 415V
  • 5 Year full parts and labour domestic warranty*
    *Conditions apply – refer warranty policy for full details.